HAB-01 | HEADSET PROTECTOR KIT - NAC INTERCOM N2C5
123,73 €
107,64 €
N2C5 Communication Headset
Our Advanced NAC-Intercom communication system for 2-meter FM radios, PMR4446, LPD443 or FRS/GMRS. Connection is established by an interchangeable, spiral shielded cable (to avoid any interference) and a Mini-XLR connector. Therefore, you can use this helmet with multiple different radios, replace it easily if damaged or simply do not plug it to avoid entanglements if you fly without a radio.
It also incorporates an electret noise cancel microphone with a windstopper foam cover, with an articulated flexible arm. Furthermore, the N2C5 allows to adjust the microphone gain - something that we already do at the factory. Nevertheless, it can be modified if the walkie model requires it or if the transmitting signal volume is very low. Also includes volume control in the headset, to costumize even more the sound reception on flight.
Communication is activated by the PTT button (Push-to-Talk), which is placed on the outer part of the shell (You can choose the side where you would like it to be placed). The PTT button is wide and sensitive and has been made with silver contacts and a constant pressure for a flawless performance. The excellent quality of the communication is achieved thanks to the noise suppression obtained by a microphone that has been specifically designed for these purposes. If your walkie comes with a VOX system, then there is no need to press the PTT. Just talk to activate the transmission. (A special cable might be necessary but we strongly disapprove of using it to avoid an accidental activation of the transmission). Lastly, it is possible to choose a medium or high-attenuation ear defender depending on the intensity of the noise generated by the engine (OPII to medium attenuation, OPIII to high attenuation and X5 to extreme attenuation).
Click to Open + Close
TYPES OF PROTECTIONS
Types of Hearing Protection
3M PELTOR OPII (31dB)
Developed for demanding noise-hazard environments and muffles even extremely low frequencies to a maximum degree. The sealing rings are filled with a unique combination of liquid and foam. The result is an optimum seal with low contact pressure, which provides snug comfort even during long-time use. The sealing rings have ventilation channels and are covered with soft, patterned, hygienic foil.
3M PELTOR OPIII (34dB)
Optime III is a super-muff, and has been developed for use in extremely noisy environments. The protection is based on a technology with a double casing that minimises resonance in the holder casing, an acoustic connection between the inner volume and the volume between the casings in its turn provides maximum low-frequency muffling. This results in maximum high-frequency muffling, while at the same time its still easy to understand speech and signals. The sealing rings are broad and filled with soft plastic foam for the best fit and low contact pressure.
3M PELTOR X5 (37db)
For use in extremely high-noise exposure environtments keeping a lightweight with excellent balance and comfort. Unique attenuation as a result of optimum combination of specially-formulated foam featured in the earcups, cushions and the innovative spacer and cup design, and a newly-designed spacer improving attenuation without excess bulk or weight.
Earcups tilt for optimum comfort and efficiency, wire headband offers comfortable pressure, a new special foam.. makes this groundbreaking ear protector a pleasure to wear during prolonged usage.
TYPES OF CONNECTIONS
Types of Connections - Pins
CB01
Cable CB01 doble jack mono 2.5 mm. y 3.5 mm. Recomendado para Walkies con conexión superior. Para conectar su radio a nuestras electrónicas MX5/NAC-Sidetone.
Especial para Walkies: Yaesu, Hora, Atlantic, Cobra, Cybercom, Rxon, Maxon, Alan, Standard.
CB02
Cable CB02 con conector doble jack de 2,5&3,5 mm acodado 90º. Para walkies compatibles con Kenwood. Para conectar su radio a nuestras electrónicas N2C5/NAC-Sidetone
Especial para Walkies: Kenwood, Misland, CT-32SH, Todas las Chinas: Handrytron, Dynascam Puxing y otras.
CB03
Cable CB03 con Jack de 2.5mm más largo que el Standard, específico para radios PMR Motorola Talkabout. Para conectar su radio a nuestras electrónicas N2C5/NAC-Sidetone.
Especial para Walkies: PMR Motorola Talkabout.
CB04
Cable CB04 con conector Jack de 3,5 mm. y cuatro contactos, acodado 90º. Para conectar su radio a nuestras electrónicas MX5/Deluxe.
Especial para Walkies: Yaesu VX-110, VX-150, VX-146, VX-246, FT-60, Dynascan, AD-09, Baofeng UV-3R.
CB05
Cable CB05 conector con rosca de 3,5 mm. y cuatro contactos. Para walkies Yaesu Vertex Standard VX sumergibles. Conexión con nuestras electrónicas N2C5/NAC-Sidetone.
Espaecial Para Walkies: Yaesu VX-120, VX-170, VX-6, VX-7.
CB-09
Cable CB09 con doble jack mono de 2.5 y 3.5 mm. Específico para radios de Motorola y otros modelos. Para conectar su radio a nuestras electrónicas N2C5/NAC-Sidetone.
Especial para Walkies: Motorola.
CB-18
Cable doble jack mono 2.5-3.5mm acodado. Utilizado en walkies FM-2m y algunas PMR (con conexión lateral). Para conectar a nuestras electrónicas N2C5/NAC-Sidetone.
CB-20
Cable CB20 doble jack mono de 2,5 y 3,5 mm. para radios Motorola con adaptador para GP340. Para conectar su radio a nuestras electrónicas N2C5/NAC-Sidetone
PTT SIDE - PUSHBUTTON
Pushbutton side - PTT
BLUETOOTH TYPES
Bluetooth Sena 3S - W
Bluetooth Sena SF2
